Programming
Creating a show. Once you have mastered the prervious steps, you can now start to enjoy
the creative versatility of your
X-TREME 19C
.
1. Press a
Show
(3) key; the
Show
key LED will light up.
2. Clear the Show Memory by pressing the
Delete
(7) and
Show
(3) keys at the same time.
The LED above the
Show
key will flash rapidly.
3. Press the
Projector
(1) key to choose a projector. The Projector LED will begin flashing.
4. Follow the steps in
Basic Play
until the projector is doing what you want it to do.
5. Press the
Projector
(1)key again, LED will stop flashing. Projector is now set.
If you want to make any changes just press the
Projector
key again and the
LED will start flashing. Make any changes you want then press the
Projector
(1)key again; the
Show
LED will stop blinking.
6. It you want to program more than one projector, select a new projector by choosing the
appropriate
Projector
(1) key, then follow the steps in
Basic Play
. When you are finished, press
the
Projecto
r (1) key again so the LED stops flashing.
7. Repeat this process until all the projectors are doing what you want them to do.
8. Now press
Enter
(10). These settings are now the first step of the Show.
Make sure that none
of the LEDs are blinking when you press Enter,or that setting will be lost.
9. Repeat steps 3-8 to program the next step.
10. To copy a step, hold the
Enter
(10) key for 2 seconds, This will copy the last scene you pro
grammed into the next step. This will speed up programming, because you can take the copied
step and make changes to it. Please follow instructs for Copy below.
11. Continue until finished.
12. Press the
Run
(9) button to see your Show.
Copy Function:
The Copy function copies the last scene to the next scene. This allows you to change the posi-
tion of one projector without affecting the others, or change the color of all the projectors without
changing their position. This will reduce the amount of time that you spend on programming,
this
is one of the most valuable features of the
X-TREME 19C
. in addition, the
Copy
function is the
only way to
program complex movements.
To use the Copy function:
1. Hold down the
Enter
(10)key for around three seconds. The projectors will turn off, and return
to their original positions.
Projector
LEDs will be lit. You have now copied your last scene
to the next step.
2. Press the
Projector
(1) key of the projector you want to make changes to. The Projector LED
will start to blink
3. In the
Copy
mode, the settings on all sliders are locked. That means the settings cannot be
changed until you "unlock" the slider.
© American DJ® Los Angeles, CA. 90058 - X-Treme/19C™ User Instructions Page 4
User Instructions - X-Treme/19C™
American DJ
®
