background image

4.  To unlock a slider while in the 

Copy

 mode, you must:

 

  a. Use the slider to make a "high/low" signal by moving the desired function slider up to the  

 

  maximum (10), then down to the minimum (0). This will "unlock" that function slider to 

 

  allow you to make adjustments.

       b. Repeat this process to unlock all the functions you want to change.
5.  When you have made all of the adjustments to that projector, press the 

Projector

 (1)key again. 

 

The 

Projector

 LED will stop flashing. That projector is now set.

6.  Repeat steps 1 through 5 until all the projectors have been adjusted.
7.  Press the 

Ente

r (10) key to go onto the next step.

     

Helpful Hin

t: 

If you forgot to copy a step, use the 

Down

 (8) key to return

 

to the last step, then press the 

Enter

 (10) key for 5 seconds and copy the scene again

.

Editing Show Programs

To review a show manually:
 

1. Press the 

Show 

(3) key.

 

2. Use the 

Up/Down

 (8) keys to step through the show.

Editing

 

1. Select a 

Show

 (3) memory to be edited.

 

2. Use the 

Up

 and 

Down

 (8)keys to move through the memory to the step you wish to change.

 

3. Select the 

Projector

 (1) you want to add or change. The 

Projector

 LED will start to blink.

 

4. Make changes to motion or colors, then press the 

Projector

 (1)key again. The 

Projector

 LED  

 

   will stop flashing.

 

5. Press the 

Enter 

(10) key. The change is now completed.

Inserting a Step

1.  Select 

Show

 (3) memory to be edited.

2.  Use the 

Up

 and 

Down

 (8) keys to move through memory to where you wish to

 

insert a step.

3.  Follow 

Basic Play

 to set-up the scene you want.

4.  Press the 

Insert

 (6) Key.

5.  Press 

Enter 

(10)

 

.  The step is now saved.

6.  Repeat steps 1 through 5 as required.

Deleting a Step

1.  Select a 

Show

 (3) memory to be edited.

2.  Use the 

Up

 and 

Down

 (8) keys to move through the memory to the step you wish to delete.

4.  Press the 

Delete

 (7) Key.  That step is now deleted.

5.  Repeat steps 1 through 4 as required.

Clearing Show Memory

1.  Press the 

Show

 (3)and 

Delete

 (7) keys at the same time.

2.  The 

Show

 LED will flash very quickly

© American DJ® Los Angeles, CA. 90058 -  X-Treme/19C™ User Instructions  Page 5

User Instructions -  X-Treme/19C™

American DJ

®

Summary of Contents for X-Treme/19C









Reviews: