5/13
User Instructions
ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 2
Sweeper Beam Quad LED
General Information
Unpacking:
Thank you for purchasing the Sweeper Beam Quad LED
by American DJ
®
. Every Sweeper Beam Quad LED has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support first.
Introduction:
The Sweeper Beam Quad LED is a intelligent, multi-
LED scanner. The Sweeper Beam Quad LED can operate as a stand
alone fixture or in a Master/Slave configuration. The Sweeper Beam
Quad LED has three operating modes; sound active mode, show
mode, and DMX control. This fixture is suitable for theaters, studios,
retail stores, and other similar locations. For best results use fog or
special effects smoke to enhance the beams projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
SWEEPER BEAM QUAD LED
