©
American DJ
®
- www.americandj.com - Shooting Star LED Instruction Manual Page 10
©
American DJ
®
- www.americandj.com - Shooting Star LED Instruction Manual Page 9
SHND
- Show modes 0 - 8 (Factory shows)
For Show Mode to
run properly, make sure Sound Active mode is off.
1. Tap the MENU button until “
SHND
” is displayed, press ENTER.
2. “
S
h
X
” will now be displayed, “X” representing a number
between 0-8. Shows 1 - 8 are preset shows, while “
S
h
0
” is
a random show. Press the UP or DOWN buttons to find your
desired show.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to confirm.
SOUN
- In this mode you can run in sound active mode.
1. Tap the MENU button until “
SOUN
” is displayed, press ENTER.
2. Either “
ON
” or “
OFF
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. When you have made your selection, press the ENTER, and
then press and hold the MENU button for at least 3 seconds to
confirm.
BLND
- This will control blackout
1. Tap the MENU button until “
BLND
” is displayed, press ENTER.
2. Either “
YES
” or “
NO
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
LED
- With this function the LED display will turn off after 2
minutes.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. Either “
ON
” or “
OFF
”
will now be displayed. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at all
times, or “
OFF
” to allow the LED display to turn off after 2 min-
utes. Press any button to turn on the LED display again.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
DISP
- This will “flip” the LED display
1. Tap the MENU button until “
DISP
” is displayed, press ENTER.
2. Press the UP button to select “
DISP
” to activate this function,
or “
DSIP
” to deactivate this function.
3. Press ENTER to confirm.
TEST
- This function can run a self test program.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the unit.
1. Tap the MENU button until “
FHRS
” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- This will display the software version
1. Tap the MENU button until “
VER
” is displayed. Press the ENTER
button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset.
Shooting Star LED
System Menu
Shooting Star LED
System Menu
