©
American DJ
®
- www.americandj.com - Shooting Star LED Instruction Manual Page 7
©
American DJ
®
- www.americandj.com - Shooting Star LED Instruction Manual Page 8
On-Board System Menu.
The Shooting Star LED comes with an
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
Please read the next
section thoroughly!
To access the main menu press the MENU button. Tap the UP or DOWN
buttons until you reach function you wish to change. When you reach
the function you wish to change press the ENTER button
.
When a
function is selected use the
UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to confirm and lock the change into the system memory. If the MENU
button
is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To
exit without making any changes press the MENU button.
ADDR
-
DMX Address Setting
via control board -
1. Tap the MENU button until “
ADDR
” is displayed, press
ENTER.
2. “
X
” will now be displayed, “X” represents the displayed address.
Press the UP or DOWN buttons to find your desired address.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
MAST
”, “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NotE:
In a Master/Slave configuration you can make one
fixture the Master and then set the next fixture to “SL 2”, the
fixtures will now have contrast movement to each other.
Shooting Star LED
System Menu
Shooting Star LED
System Menu
