background image

Unpacking: 

Thank you for purchasing the ScanTron™ by American 

DJ

®

.  Every  ScanTron™  has  been  thoroughly  tested  and  has  been 

shipped in perfect operating condition. Carefully check the shipping 
carton  for  damage  that  may  have  occurred  during  shipping.  If  the 
carton appears to be damaged, carefully inspect your fixture for any 
damage and be sure all equipment necessary to operate the unit has 
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Please do not return this unit to your dealer without first 
contacting customer support. 

Introduction: 

This unit is five channel DMX intelligent scanner that 

may be easily converted to an intelligent color changer by removing 
the mirror unit.  This unit can also run as a stand alone, sound-active 
unit,  or  in  a  Master/Slave  configuration  as  either  a  scanner  or  color 
changer. The ScanTron

 comes with several build in programs and is 

best used in multiples of four. When used as a stand alone unit or when 
used  in  multiples  linked  in  a  master/slave  configuration  the  optional 
IRC/1 controller may be used. The optional controller will access dif-
ferent programs and control a blackout function. 

For best results use 

fog or special effects smoke to enhance the beams projections. 

 

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide set up help and to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-
ments or suggestions. Service Hours are Monday through Friday 9:00 
a.m. to 5:00 p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2610

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact American DJ

®

.

  ScanTron™   

      

                            General Information

©

American DJ

®

  -  www.americandj.com  - ScanTron™ Instruction Manual Page 2

Revised 5/10

User Instructions

Summary of Contents for ScanTron









Reviews: