©
American DJ
®
- www.americandj.com - Ruby Star™ Instruction Manual Page 4
©
American DJ
®
- www.americandj.com - Ruby Star™ Instruction Manual Page 3
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
• 4.9mW Red Laser Diode
• Built-In Hanging Yoke
• Sound Active with Internal Microphone
• Fan Cooled
• 16 Patterns
• Music Sensitivity Knob
The Ruby Star™ carries a 90 day limited warranty. Please fill out the
enclosed warranty card to validate your purchase. All returned service
items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. If the unit is under
warranty you must provide a copy of your proof of purchase invoice.
Please contact American DJ
®
customer support for a R.A. number.
Caution:
Always replace with the exact same type fuse, unless oth-
erwise specified by an authorized American DJ
®
technician.
Use of a
different type fuse from that which is recommended may cause fire or
electric shock and will void the manufactures warranty.
Warning:
If you continue to blow fuses, STOP using the unit. Contact
customer support for further instructions, you may have to return the
unit for servicing. Continuing to use the unit may cause serious dam-
age.
Fuse Replacement:
Disconnect the unit’s main power supply.
Use a flat head screw drive to pry out the fuse holder. When the
fuse holder is exposed remove the old fuse and replace it with a
similar one. The fuse holder comes with a slot for a spare fuse. When
replacing and checking the fuse, be sure to check the fuse that has
the metal ends completely exposed.
Safety Issues:
This unit may blow a fuse if the maximum allotted load
of 2 amps (1 amp 220v) is reached.
• To reduce the risk of electrical shock or fi re, do not expose this unit
rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fi re in case of an internal short. Do not attempt to oper-
ate this unit if the power cord has been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 6 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A.
The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C.
The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
DANGER
VISIBLE LASER RADIATION
VISIBLE LASER RADIA
VISIBLE LASER RADIA
-AVOID DIRECT
-A
-A
EYE EXPOSURE
VOID DIRECT
VOID DIRECT
LASER DIODE
WAVELENGTH : 635~650 nm
WA
WA
Max Output : <4.9mW
Class IIIa Laser Product
!
!
Ruby Star™
Warranty Registration
Ruby Star™
Features
Ruby Star™
General Instructions
Ruby Star™
Specifications
Ruby Star™
Fuse Replacement
