background image

©

American DJ Supply

®

  -  www.americandj.com  - Reflex LED DMX™ User Manual Page 12

©

American DJ Supply

®

  -  www.americandj.com  - Reflex LED DMX™ User Manual Page 11

2.  On the Master unit press the MENU button until “

SLND

” is dis-   

 

played, press ENTER. Either “

MAST

”, “

SL 1

” (slave mode normal) or  

 

SL 2

” (slave mode 2 light show) will be displayed. Press the UP or  

 

DOWN buttons to set the fixture to “

MAST

”, and press ENTER.

3.  

On the slave units tap the MENU button until “

SLND

” is displayed, 

 

press ENTER. Set the fixture to either “

SL 1

” or “

SL 2

” and press  

 

ENTER.

4.   The slave units will now follow the Master unit.
5

.  

The optional UC3 Controller (not included) may be used to  

    control different functions including blackout.

 

If you want to

  

   

use the optional remote control, connect the UC3 controller to the 

   

first fixture in the line (master).  

 

Stand By

Blackout the unit

Function

1. Synchronous Strobe
2. Sound Strobe
3. Two light Show Strobe

Select Pattern Select  Chase

Mode

Sound
(LED Off )

Pattern
(Led On)

Chase
(Led

 SlowStrobe

)

 Reflex LED DMX™ 

             Operating Instructions

 Reflex LED DMX™ 

                              UC3 Control

 

  Channel 

     Value 

 

  Function (Left Side)

          

1

             

  0 - 255

        

                        PAN

        2               0 - 255                 PATTERNS & CHASES

        

                                                                               

                 

                        

                         0 - 9                               BLACKOUT
                       10 - 19                             PATTERN 1
                       20 - 29                             PATTERN 2
                       30 - 39                             PATTERN 3
                       40 - 49                             PATTERN 4
                       50 - 59                             PATTERN 5
                       60 - 69                             PATTERN 6
                       70 - 79                             PATTERN 7
                       80 - 89                             PATTERN 8
                       90 - 99                             PATTERN 9
                     100 - 109                          PATTERN 10
                     110 - 119                          PATTERN 11
                     120 - 129                          PATTERN 12
                     130 - 139                          PATTERN 13
                     140 - 149                          PATTERN 14
                     150 - 159                          PATTERN 15
                     160 - 169                             CHASE 1
                     170 - 179                             CHASE 2
                     180 - 189                             CHASE 3
                     190 - 199                             CHASE 4
                     200 - 209                             CHASE 5
                     210 - 219                             CHASE 6
                     220 - 229                             CHASE 7
                     230 - 239                             CHASE 8
                     240 - 249                             CHASE 9
                     250 - 255                            CHASE 10         

       

        

        

3                                                        STROBE

                         0 - 9                               NO STROBE      
                       10 - 255                  STROBE SLOW - FAST

  

 

           

 Reflex LED DMX™ 

                                DMX Traits

With  this  feature  you  can  connect  the  fixtures  to  one  another 

using the IEC input and output sockets. The quantity that can be 

connected is 30 fixtures maximum. After 30 fixtures you will need 
to use a new power outlet. They must be the same fixtures. DO 
NOT mix fixtures.

 Reflex LED DMX™ 

     Power Cord Daisy Chaining

Summary of Contents for Reflex LED DMX









Reviews: