Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the pan feature, chases and
patterns, and strobe effect. A DMX controller allows you to create
unique programs tailored to your individual needs.
1. The Reflex LED DMX™ has six DMX Channels. See pages 12 -13
for detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand Alone:
1. Once the fixture is plugged in it will automatically respond to
sound via the microphone. If it does not press the MENU button
until “
SLND
” is displayed, and press ENTER. Then press the UP
or DOWN buttons until “
MAST
” is displayed and press ENTER.
After you have finished setting the mode it will take at least 8 sec-
onds for sound active mode to respond.
2. The optional UC3 Controller (not included) may be used to control
different functions including blackout.
Master-Slave Operation:
This function will allow you to link fixtures together and operate without
a controller.
In Master-Slave operation one unit will act as the control
-
ling unit and the others will react to the controlling units programs. Any
unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
3. Press ENTER to confirm and exit.
I DSP
-
This function will reverse the display 180º.
1. Tap the MENU button until “
I DSP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. To save the adjustment press any other button.
FHRS
- With this function you can display the running time
of the unit.
1. Tap the either the MENU button until “
FHRS
” is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Tap the either the MENU button until “
VER
” is displayed,
press ENTER.
2. The display will show the software version.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset.
Reflex LED DMX™
System Menu
©
American DJ Supply
®
- www.americandj.com - Reflex LED DMX™ User Manual Page 10
©
American DJ Supply
®
- www.americandj.com - Reflex LED DMX™ User Manual Page 9
Reflex LED DMX™
Operating Instructions
