LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until DS-1 is displayed, press the UP button to display DS-2.
Now the display will disappear after 10s. Press any button for at least
10s to turn the display on again. Be advised though that the display
will turn off automatically after 10 seconds.
To set the display press the MODE button until DS-X is displayed.
The display will now stay on at all times.
DS-1= LCD display on at all times.
DS-2= LCD display shuts off after 10 seconds.
DMX Mode:
The Pro Par56 CWWW has 2 DMX Channel modes. You can choose
between 3 DMX channels or 4 DMX Channels. Operating through a
DMX controller give the user the freedom to create their own pro-
grams tailored to their own individual needs.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
Elation
®
Show Designer™ or the Elation
®
DMX Operator.™
2. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller.
3. Choose your DMX channel mode -
Press the MODE button until “1XXX” is displayed, this is 4 chan-
nel mode. Press the UP or DOWN button to find your desired
DMX address.
Press the MODE button until “2XXX” is displayed, this is 3 chan-
nel mode. Press the UP or DOWN button to find your desired
DMX address.
4. Please see pages 10-11 for DMX values and traits.
Sound Active Mode:
In this mode the Pro Par56 CWWW will react to sound.
1. Plug the fixture in and press the MODE button until “3-So” is dis-
played
.
2. The fixture will now change via sound.
Pro Par56 CWWW Operating Instructions
©
American DJ Supply
®
- www.americandj.com - Pro Par56 CWWW User Manual Page 8
©
American DJ Supply
®
- www.americandj.com - Pro Par56 CWWW User Manual Page 7
Cool White (CW) Manual Adjust Mode:
In this mode you are able to adjust the cool white color to your de-
sired temperature.
1. Press the MODE button until “4-XX” is displayed
.
2. Press either the UP or DOWN buttons to adjust the intensity of cool
white
.
Warm White (WW) Manual Adjust Mode:
In this mode you are able to adjust the warm white color to your de-
sired temperature.
1. Press the MODE button until “5-XX” is displayed
.
2. Press either the UP or DOWN buttons to adjust the intensity of
warm white
.
White Preset Mode:
In this mode you can select one of the already preset white color tem-
peratures. Please see the next page for preset color temperatures.
1. Press the MODE button until “6-XX” is displayed
.
2. Press either the UP or DOWN buttons to choose your desired pre-
set white color temperature
.
.
Strobe Mode:
Activate strobing and adjust the strobe rate.
1. Press the MODE button until “7-XX” is displayed
.
2. Adjust the strobe speed by pressing either the UP or DOWN but-
tons. The speed can be adjusted from “7-01” the slowest, to “7-20”
the fastest.
Pulse Mode:
Activate pulsing and adjust the pulse rate.
1. Press the MODE button until “8-XX” is displayed
.
2. Adjust the pulse speed by pressing either the UP or DOWN but-
tons. The speed can be adjusted from “8-01” the slowest, to “8-16”
the fastest.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
Pro Par56 CWWW Operating Instructions
