![background image](http://html1.mh-extra.com/html/american-dj/octo-beam-rgbw/octo-beam-rgbw_user-instructions_2922812008.webp)
ADJ Products, LLC - www.adj.com - Octo Beam RGBW Instruction Manual Page 15
Octo Beam RGBW 1 Channel Mode
Channel Value
Function
1 SHOWS
0 - 7 BLACKOUT
8 - 27 SHOW 1
28 - 47 SHOW 2
48 - 67 SHOW 3
68 - 87 SHOW 4
88 - 107 SHOW 5
108 - 127 SHOW 6
128 - 147 SHOW 7
148 - 167 SHOW 8
168 - 187 SHOW 9
188 - 207 SHOW 10
208 - 227 SHOW 11
228 - 247 SHOW 12
248 - 255 RANDOM SHOW
Octo Beam RGBW 8 Channel Mode
Channel Value
Function
1 - 8
DIMMER
0 - 255 0% - 100%
Note: All shows are sound active when a music source is pres-
ent.
ADJ Products, LLC - www.adj.com - Octo Beam RGBW Instruction Manual Page 14
Octo Beam RGBW UC3 Control
Master-Slave Operation:
This function will allow you to link up to 16
units together and operate without a controller. In Master-Slave opera-
tion one unit will act as the controlling unit and the others will react to
the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using appropriate XLR cables, daisy chain your units together via
the XLR connector on the rear of the units. Remember the Male
XLR connector is the input and the Female XLR connector is the
output. The first unit in the chain (master) will use the female XLR
con nector only - The last unit in the chain will use the male XLR
con nector only. For longer cable runs we suggest a terminator at
the last fixture.
2. Set the Master unit to your desired operational mode. After you
have set your desired operational mode, press the MENU button
until “SLND” is displayed, and Press ENTER. Use the UP or
DOWN buttons to find the “MAST” setting and press ENTER.
3. On the slave units
tap the MENU button until “SLND” is display-
ed, and Press ENTER. Use the UP or DOWN buttons to switch
between either “SL 1” or “SL 2”. Once you have made your
choice, press ENTER. For more info see page 8.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See UC3 Control below.
Octo Beam RGBW Master-Slave Set Up
Blackout Blackout the fixture
Function 1. Synchronous strobe by auto.
2. Synchronous strobe by sound
Select show
1-12
Mode
Sound 1
(LED OFF)
Show
(LED slow blinking)