background image

  Jelly Par Profile                                                   Warranty 

  Jelly Par Profile                                      Trouble Shooting

Listed below are a few common problems the user may encounter, 

with solutions.
Unit not responding to DMX:

1.  Check that the DMX cables are connected properly and are    

  wired correctly (pin 3 is “hot”; on some other DMX devices    

  pin 2 may be ‘hot’). Also, check that all cables are connected   

  to the right connectors; it does matter which way the inputs    

  and outputs are connected.
Unit does not respond to sound:

1.  Quiet or high pitched sounds will not activate the unit.

2.  Make sure that Sound Active mode is activated.

  Jelly Par Profile                                                   Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light 

output.  

1.   Use normal glass cleaner and a soft cloth to wipe down the 

  outside casing.

2.   Clean the external optics with glass cleaner and a soft cloth 

  every 20 days.

3.  Always be sure to dry all parts completely before plugging 

  the unit back in.

Cleaning frequency depends on the environment in which the fixture 

operates (i.e. smoke, fog residue, dust, dew). 

Disconnect the unit from its power source. Remove the power cord 

from the unit. Once the cord has been removed, you will find that the 

fuse holder is located inside the power socket. Insert a flat-head screw 

driver into the power socket and gently pry out the fuse holder. Remove 

the bad fuse and replace with a new one. The fuse holder also has a 

holder for a spare fuse.

  Jelly Par Profile                                    Fuse Replacement

©

American DJ

®

  -  www.Americandj.com  - Jelly Par Profile User Manual Page 17

©

American DJ

®

  -  www.Americandj.com  - Jelly Par Profile User Manual Page 18

With  this  feature  you  can  connect  the  fixtures  to  one  another 

using the IEC input and output sockets. The quantity that can be 

connected is 33 fixtures maximum. After 33 fixtures you will need 

to use a new power outlet. They must be the same fixtures. DO 

NOT mix fixtures.

  Jelly Par Profile                           Power Cord Daisy Chain

MANUFACTURER’S LIMITED WARRANTY

A.  

American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American 

Audio products to be free of manufacturing defects in material and workmanship for a prescribed 

period from the date of purchase (see specific warranty period on reverse). This warranty shall be 

valid only if the product is purchased within the United States of America, including possessions and 

territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable 

evidence, at the time service is sought. 
B. 

For warranty service you must obtain a Return Authorization number (RA#) before sending 

back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send the product 

only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the requested repairs or 

service (including parts replacement) are within the terms of this warranty, American DJ, Inc. will pay 

return shipping charges only to a designated point within the United States. If the entire instrument is 

sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If 

any accessories are shipped with the product, American DJ, Inc. shall have no liability whatsoever for 

loss of or damage to any such accessories, nor for the safe return thereof.  
C.  

This warranty is void if the serial number has been altered or removed; if the product is 

modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability of 

the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. 

factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the product 

is damaged because not properly maintained as set forth in the instruction manual. 
D. 

This is not a service contract, and this warranty does not include maintenance, cleaning or 

periodic check-up. During the period specified above, American DJ, Inc. will replace defective parts 

at its expense with new or refurbished parts, and will absorb all expenses for warranty service and 

repair labor by reason of defects in material or workmanship.  The sole responsibility of American DJ, 

Inc. under this warranty shall be limited to the repair of the product, or replacement thereof, including 

parts, at the sole discretion of American DJ.  All products covered by this warranty were manufactured 

after January 1, 1990, and bear identifying marks to that effect. 
E. 

American DJ, Inc. reserves the right to make changes in design and/or improvements upon 

its products without any obligation to include these changes in any products theretofore manufac-

tured. No warranty, whether expressed or implied, is given or made with respect to any accessory 

supplied with products described above. Except to the extent prohibited by applicable law, all implied 

warranties made by American DJ, Inc. in connection with this product, including warranties of mer-

chantability or fitness, are limited in duration to the warranty period set forth above. And no warran-

ties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to 

this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such 

repair or replacement as is expressly provided above; and under no circumstances shall American DJ, 

Inc. be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to 

use, this product.  
This warranty is the only written warranty applicable to American DJ and American Audio  

Products and supersedes all prior warranties and written descriptions of warranty terms and 

conditions heretofore published. 
MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Amplifiers) 

• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty (Such 

as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, 

Mirror Balls, Par  Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, and Star Tec 

Series) 

• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors, PCB boards, 

and power supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 

day limited warranty).

Summary of Contents for Jelly Par Profile











Reviews: