background image

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  
   rain or moisture
•   Do not spill water or other liquids into or on to your unit.
•   Be sure that the local power outlet match that of the required volt-
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been 
   frayed or broken. 
•   Do not attempt to remove or break off the ground prong from    
   the electrical cord. This prong is used to reduce the risk of electrical  
   shock and fire in case of an internal short.
•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to cords at plugs, convenience recep- 
   tacles, and the point where they exit from the appliance. 
• Cleaning -The fixture should be cleaned only as recommended by  
   the manufacturer. See page 16 for cleaning details.
•   Heat -This fixture should be situated away from heat sources such 
   as radiators, heat registers, stoves, or other appliances (including 
   amplifiers) that produce heat.
•   The fixture should  be serviced by qualified service personnel when:
    A. Objects have fallen, or liquid has been spilled into the appliance.
    B. The appliance has been exposed to rain or water.
    C. The appliance does not appear to operate normally or exhibits a  
     

  

 marked change in performance.

 Jellyfish    

                                 Safety Precautions

American DJ

®

  -  www.americandj.com  - Jellyfish Instruction Manual Page 4

American DJ

®

  -  www.americandj.com  - Jellyfish Instruction Manual Page 3

•   DMX-512 Protocol Compatible   
•  2 DMX Channel Modes: 3 Channel & 28 Channel
•  3 Operating Modes - Sound Active, Show, DMX Control
•  Stand Alone or Master/Slave Configuration
•  Internal Microphone 
•   UC3 Controller (Not Included)
•  Power Cord Daisy Chaining

 Jellyfish    

 

                                       Features

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact 
American DJ

®

.

American DJ

®

 will not accept any liability for any resulting damages 

caused  by  the  non-observance  of  this  manual  or  any  unauthorized 

modification to this unit.

  Jellyfish                                        Handling Precautions

 Jellyfish 

  

                            Warranty Registration

The Jellyfish carries a 3 year (1095 days) limited warranty. Please fill 
out  the  enclosed  warranty  card  to  validate  your  purchase  and  war-
ranty. You may also register your product online at www. americandj.
com. All returned service items whether under warranty or not, must 
be freight pre-paid and accompany a return authorization (R.A.) num-
ber.  If  the  unit  is  under  warranty  you  must  provide  a  copy  of  your 
proof  of  purchase  invoice.  Please  contact  American  DJ®  customer 
support for a R.A. number.

To  optimize  the  performance  of  this  product,  please  read  these 
operating  instructions  carefully  to  familiarize  yourself  with  the  basic 
operations  of  this  unit.  These  instructions  contain  important  safety 
information  regarding  the  use  and  maintenance  of  this  unit.  Please 
keep this manual with the unit, for future reference.

 Jellyfish    

                              General Instructions

Summary of Contents for Jelly Fish











Reviews: