American DJ
®
- www.americandj.com - Inno Roll LED Instruction Manual Page 16
American DJ
®
- www.americandj.com - Inno Roll LED Instruction Manual Page 15
Inno Roll LED
Operation
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 9 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER. Tap the UP or DOWN buttons so that “
ON
” is dis
played and press ENTER.
2. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of 6 shows that you choose. Show mode
can run with or without sound active mode.
1. Press the MENU button until
“
SHND
” is displayed, and press
ENTER.
2.
Press the UP or DOWN buttons until you find your desired show,
press ENTER, then press and hold the MENU button for at least 3
seconds to activate. After you have set your desired show, it can
be changed at any time using the UP or DOWN buttons.
Inno Roll LED UC3 Control
Stand by Blackout the unit
Function 1. Strobe in synchronization
2. strobe in desynchronization
3. Strobe by music
Select Movement
1-6
Color/Gobo selection
1. Press shortly for
color change.
2. Hold on for
Gobo change
Mode
Sound
(LED OFF)
Movement
(LED Blinking)
Gobo/Color
(LED ON)
Operating Modes: The Inno Roll LED can operate in three dif-
ferent modes. In each mode you can run the fixture as a stand
alone fixture or in a master/slave confiugration. This next sec-
tion will detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of six shows that you choose.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
®
Show
Designer.
™
Master-Slave Operation
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressiing the ENTER button.
3. On the slave units
tap the MENU button until “
SLND
” is dis-
played, and Press ENTER. Choose either
“
SL 1
” or “
SL 2
” and
press ENTER. See page 9 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Inno Roll LED is an eight DMX channel DMX fixture. See
pages 16-18 for detailed description of the DMX values and traits.
Inno Roll LED
Operation
