background image

 Inno Roll LED 

 

                                       Warranty

  Inno Roll LED 

 

                                        Cleaning

  Inno Roll LED 

 

 

                Trouble Shooting

Trouble Shooting: Listed below are a few common problems that 

you may encounter, with solutions.
No light output from the unit;
1.    Be sure the external fuse has not blown. The fuse is located on  

   the bottom panel of the unit. 

2.   Be sure the fuse holder is completely and properly seated. 

 

Unit does not respond to sound;
1.     Low frequencies (bass) should cause the unit to react to sound.

    Tapping on the microphone, quiet or high pitched sounds may

   not activate the unit.  

Fixture Cleaning:

 Due to fog residue, smoke, and dust cleaning 

the internal and external optical lenses and mirror should be carried 

out periodically to optimize light output. Cleaning frequency depends 

on  the  environment  in  which  the  fixture  operates  (I.e.  smoke,  fog 

residue, dust, dew). In heavy club use we recommend cleaning on a 

monthly basis. Periodic cleaning will ensure longevity, and crisp out-

put.
1.  Use normal glass cleaner and a soft cloth to wipe down the out- 

  side casing.

2.   Use a brush to wipe down the cooling vents and fan grill.

3.   Clean the external optics with glass cleaner and a soft  cloth every  

  20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth every  

  30-60 days.

5.  Always be sure to dry all parts completely before plugging the unit  

  back in.

  Inno Roll LED 

                                           Fuse Replacement

Locate and remove the unit’s power cord. Once the cord has been 

removed located the fuse holder located inside the power socket. 

Insert a flat-head screw driver into the power socket and gently pry 

out the fuse holder. Remove the bad fuse and replace with a new one. 

The fuse holder has a built-in socket for a spare fuse be sure not to 

confuse the spare fuse with active fuse.

American DJ

®

  -  www.americandj.com  - Inno Roll LED Instruction Manual Page 21

American DJ

®

  -  www.americandj.com  - Inno Roll LED Instruction Manual Page 22

MANUFACTURER’S LIMITED WARRANTY

A.  

American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American 

Audio products to be free of manufacturing defects in material and workmanship for a prescribed 

period from the date of purchase (see specific warranty period on reverse). This warranty shall be 

valid only if the product is purchased within the United States of America, including possessions 

and territories. It is the owner’s responsibility to establish the date and place of purchase by ac-

ceptable evidence, at the time service is sought. 
B. 

For warranty service you must obtain a Return Authorization number (RA#) before 

sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send 

the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the 

requested repairs or service (including parts replacement) are within the terms of this warranty, 

American DJ, Inc. will pay return shipping charges only to a designated point within the United 

States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories 

should be shipped with the product. If any accessories are shipped with the product, American DJ, 

Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the 

safe return thereof.  
C.  

This warranty is void if the serial number has been altered or removed; if the product is 

modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability 

of the product; if the product has been repaired or serviced by anyone other than the American DJ, 

Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the 

product is damaged because not properly maintained as set forth in the instruction manual. 
D. 

This is not a service contract, and this warranty does not include maintenance, cleaning 

or periodic check-up. During the period specified above, American DJ, Inc. will replace defec-

tive parts at its expense with new or refurbished parts, and will absorb all expenses for warranty 

service and repair labor by reason of defects in material or workmanship.  The sole responsibility 

of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replace-

ment thereof, including parts, at the sole discretion of American DJ.  All products covered by this 

warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. 
E. 

American DJ, Inc. reserves the right to make changes in design and/or improvements 

upon its products without any obligation to include these changes in any products theretofore 

manufactured. No warranty, whether expressed or implied, is given or made with respect to any 

accessory supplied with products described above. Except to the extent prohibited by applicable 

law, all implied warranties made by American DJ, Inc. in connection with this product, including 

warranties of merchantability or fitness, are limited in duration to the warranty period set forth 

above. And no warranties, whether expressed or implied, including warranties of merchantability 

or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s 

sole remedy shall be such repair or replacement as is expressly provided above; and under no 

circumstances shall American DJ, Inc. be liable for any loss or damage, direct or consequential, 

arising out of the use of, or inability to use, this product.  
This warranty is the only written warranty applicable to American DJ and American Audio  

Products and supersedes all prior warranties and written descriptions of warranty terms and 

conditions heretofore published. 
MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampli-

fiers) 

• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty 

(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble 

Machines, Mirror Balls, Par  Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, 

and Star Tec Series) 

• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors, PCB 

boards, and power supplies, which have a 1-year (365 day Limited Warranty).

Summary of Contents for Inno Roll LED













Reviews: