ADJ Products, LLC - www.adj.com - Inno Color Beam Quad 7 User Manual Page 3
• RGBW Color Mixing
• 7 x 10W High Quatlity CREE LEDs
• Strobe Effect
• Color Mix Effect
• Pan/Tilt Inversion
• Electronic Dimming 0-100%
• Dimmer Curve
• Built in Microphone
• DMX-512 protocol
• Two DMX Modes: 1 Channel Mode & 13 Channel Mode
• 3 Operating Modes - Sound Active, Show Mode, or DMX Control
• UC3 Remote Control Compatiable (Not Included)
• Power Cord Daisy Chaining (See Page 19)
Inno Color Beam Quad 7
Warranty Registration
The Inno Color Beam Quad 7 carries a 3 year (1095 days) limited
warranty. Please fill out the enclosed warranty card to validate your
purchase and warranty. You may also register your product online at
www. americandj.com. All returned service items whether under war-
ranty or not, must be freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under warranty you must provide a
copy of your proof of purchase invoice. Please contact ADJ customer
support for a R.A. number.
Inno Color Beam Quad 7
Features
To optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
Inno Color Beam Quad 7 General Instructions
Inno Color Beam Quad 7 Introduction
ADJ Products, LLC - www.adj.com - Inno Color Beam Quad 7 User Manual Page 2
Unpacking:
Thank you for purchasing the Inno Color Beam Quad
7 by ADJ Products, LLC. Every Inno Color Beam Quad 7 has been
thoroughly tested and has been shipped in perfect operating condi-
tion. Carefully check the shipping carton for damage that may have
occurred during shipping. If the carton appears to be damaged, care-
fully inspect your fixture for any damage and be sure all accessories
necessary to operate the unit has arrived intact. In the case damage
has been found or parts are missing, please contact our toll free cus-
tomer support number for further instructions. Do not return this unit to
your dealer without first contacting customer support.
Introduction:
The Inno Color Beam Quad 7 is part of ADJ’s continuing
pursuit for creating high quality affordable intelligent fixtures. The Inno
Color Beam Quad 7 is a high performance, DMX intelligent, moving
head LED fixture. This fixture is a great piece for retail stores, displays,
mood, architectural, interior and exterior decoration, and clubs. This
unit can be used as a stand alone, or in a Master/Slave configuration.
The unit can also be controlled via DMX controller. This fixture is suit-
able for theaters, studios, retail stores, and other similar locations.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide set up help and to answer any question
should you encounter problems during your set up or initial operation.
You may also visit us on the web at www.adj.com for any comments
or suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
