background image

User Instructions

©

American DJ

®

 - www.americandj.com - Image 8 DMX™ Instruction Manual Page 2

Unpacking:

 Thank you for purchasing the Image 8 DMX™ by Ameri-

can DJ

®

. Every Image 8 DMX™ has been thoroughly tested and has 

been shipped in perfect operating condition. Carefully check the ship-

ping  carton  for  damage  that  may  have  occurred  during  shipping.  If 

the carton appears to be damaged, carefully inspect your unit for any 

damage and be sure all equipment necessary to operate the system 

has arrived intact. In the event damage has been found or parts are 

missing, please contact our toll free customer support number for fur-

ther instructions. Please do not return the unit to your dealer without 

first contacting customer support. 

Introduction:

 The Image 8 DMX™ is a unique three channel, DMX 

intelligent,  eight  beam  red  laser  effect  that  creates  several  different 

patterns over a wide area. 

This  unit  can  be  used  as  a  stand  alone, 

sound-active unit or in a Master/Slave configuration. The unit can also 
be controlled via DMX controller.  The unit’s sound sensitivity may be 
adjusted by a sensitivity knob on the rear of the unit. 

For best results 

use fog or special effects smoke to enhance the beams projections.

Customer Support:

 

American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and  to answer any question should 

you  encounter  problems  during  your  set  up  or  initial  operation.  You 

may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-

ments or suggestions. For service related issue please contact Ameri-

can DJ

®

. Service Hours are Monday through Friday 9:00 a.m. to 5:00 

p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2610

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ.

PLEASE recycle the shipping carton when ever possible.

  Image 8 DMX™  

 

     General Introduction

Rev. 10/09

Summary of Contents for IMAGE 8 DMX











Reviews: