background image

©

American DJ

®

 - www.americandj.com - Green Phantom™ Instruction Manual Page 4

©

American DJ

®

 - www.americandj.com -  Green Phantom™ Instruction Manual Page 3

Please carefully read and understand the instructions in this manual 
thoroughly before attempting to operate this unit. These instructions 
contain  important  safety  information  regarding  the  use  and  mainte-
nance  of  this  unit.  Please  keep  this  manual  with  the  unit,  for  future 
reference. 

CAUTION IMPORTANT! When installing this projector, make sure 
that  it  is  mounted  in  a  manner  that  prevents  the  audience  from 
looking  directly  into  the  beam,  and  the  beam  from  striking  the 
audience.

•  4.9mW Green Laser Diode
•  Sound Active with Internal Microphone 
•  DMX-512 Protocol Compatible (Uses Two DMX Channels)
•  Master/Slave Operation/Stand Alone/Sound Active, Manual Mode  
  & Auto Mode
•  Pattern & Elapse Time Knob
•  Mode Selection Switch

•  To reduce the risk of electrical shock or fire, do not expose this unit

     rain or moisture.
•   Do not spill water or other liquids  into or on to your unit.
•   Do not attempt to remove or break off the ground prong from the
    electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short. Do not attempt to oper-

   ate this unit if the power cord has been frayed or broken.
•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   During long periods of non-use, disconnect the unit’s main power.
•   Always mount this unit in safe and stable matter.
•   Power cords should be routed so they are not likely to be walked  
   on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by  
   the manufacturer. See page 13 for cleaning details.
•   Heat -The appliance should be situated away from heat sources  
   such as radiators, heat registers, stoves, or other appliances    
   (including amplifiers) that produce heat.
•   The fixture should be serviced by qualified service personnel when:
    A.  The power-supply cord or the plug has been damaged.
    B.   Objects have fallen on, or liquid has been spilled into the unit.
    C.  The unit has been exposed to rain or water.
    D.   The unit does not appear to operate normally or exhibits a
            marked change in performance.

!

!

 Green Phantom™                               Warranty Registration

 Green Phantom™   

 

 

                    Features

 Green Phantom™                                 General Instructions

 Green Phantom™   

                        Safety Precautions

The  Green  Phantom™  carries  a  90  day  limited  warranty.  Please  fill 
out the enclosed warranty card to validate your purchase. All returned 
service items whether under warranty or not, must be freight pre-paid 
and accompany a return authorization (R.A.) number. The R.A. num-
ber  must  be  clearly  written  on  the  outside  of  the  return  package.  A 
brief description of the problem as well as the R.A. number must also 
be written down on a piece of paper included in the shipping carton. 
If the unit is under warranty, you must provide a copy of your proof of 
purchase  invoice.  You  may  obtain  a  R.A.  number  by  contacting  our 
customer support team on our toll free customer support number. All 
packages  returned  to  the  service  department  not  displaying  a  R.A. 
number on the outside of the package will be returned to the shipper.

Summary of Contents for Green Phantom









Reviews: