©
American DJ
®
- www.americandj.com - Galaxian Gem LED Instruction Manual Page 17
©
American DJ
®
- www.americandj.com - Galaxian Gem LED Instruction Manual Page 18
Galaxian Gem LED UC3 Control
Channel Value
Function
1
LASER ON/OFF
0 - 7 LASER OFF
8 - 15 LASER ON
16 - 239 LASER STROBING SLOW - FAST
240 - 247 LASER SOUND ACTIVE
248 - 255 LASER ON
2 LASER ROTATION
0 - 9 NO ROTATION
10 - 120 CLOCKWISE FAST - SLOW
121 - 134 NO ROTATION
135 - 245 COUNTER-CLOCKWISE SLOW - FAST
246 - 255 NO ROTATION
3 LED CHASES
0 - 7 BLACKOUT
8 - 37 CHASE 1
38 - 67 CHASE 2
68 - 97 CHASE 3
98 - 127 CHASE 4
128 - 157 CHASE 5
158 - 187 CHASE 6
188 - 217 CHASE 7
218 - 247 CHASE 8
248 - 255 SOUND ACTIVE
4 LED CHASE SPEED
0 - 255 SLOW - FAST
5 LED STROBING
0 - 7 NO FUNCTION
8 - 247 STROBING SLOW - FAST
248 - 255 SOUND ACTIVE STROBING
Galaxian Gem LED
DMX Values & Traits
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning
the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure lon-
gevity, and crisp beam output.
Galaxian Gem LED
Cleaning
Galaxian Gem LED
Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1.
Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Galaxian Gem LED Fuse Replacement
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
