background image

  Fusion Tri FX Bar                                  Safety Precautions

©

American DJ Supply

®

  -  www.americandj.com  - Fusion Tri FX Bar - Page 4

©

American DJ Supply

®

  -  www.americandj.com  - Fusion Tri FX Bar - Page 3

•  Electronic Dimming 0-100%

•   Built in Microphone

•   DMX-512 protocol

•   Eight DMX Channels

•  Optional 12 Degree Lenses

•  3 Operating Modes - Sound Active, Show Mode, or DMX Control

•  UC3 Remote Control Compatiable (Not Included)

•  Power Cord Daisy Chaining

•  To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture

•  Do not spill water or other liquids  into or on to your unit.

•  Be sure that the local power outlet match that of the required volt- 

   age for your unit.

•  Do not attempt to operate this unit if the power cord has been   

   frayed or broken. Do not attempt to remove or break off the ground 

   prong from the electrical cord. This prong is used to reduce the risk  

   of electrical shock and fire in case of an internal short.

•  Disconnect from main power before making any type of connection.

•   Do not remove the cover under any conditions. There are no user  

   serviceable parts inside.

•  Never operate this unit when it’s cover is removed.

•  Never plug this unit in to a dimmer pack

•  Always be sure to mount this unit in an area that will allow proper  

   ventilation. Allow about 6” (15cm) between this device and a wall.

•  Do not attempt to operate this unit, if it becomes damaged.

•  This unit is intended for indoor use only, use of this product out`  

   doors voids all warranties.

•  During long periods of non-use, disconnect the unit’s main power.

•  Always mount this unit in safe and stable matter.

•  Power-supply cords should be routed so that they are not likely to  

   be walked on or pinched by items placed upon or against them,  

   paying particular attention to the point they exit from the unit. 

• Cleaning -The fixture should be cleaned only as recommended by  

  t he manufacturer. See page 15 for cleaning details.

•  Heat -The appliance should be situated away from heat sources  

   such as radiators, heat registers, stoves, or other appliances (inclu-

   d ing amplifiers) that produce heat.

•  The fixture should  be serviced by qualified service personnel when:

    A. The power-supply cord or the plug has been damaged.

    B. Objects have fallen, or liquid has been spilled into the appliance.

    C. The appliance has been exposed to rain or water.

    D. The appliance does not appear to operate normally or exhibits a  

        marked change in performance.

  Fusion Tri FX Bar   

                   Warranty Registration

The Fusion Tri FX Bar carries a 3 year (1095 days) limited warranty. 

Please fill out the enclosed warranty card to validate your purchase 

and warranty.  You may also register your product online at www. 

americandj.com. All returned service items whether under warranty or 

not, must be freight pre-paid and accompany a return authorization 

(R.A.) number. If the unit is under warranty you must provide a copy 

of your proof of purchase invoice. Please contact American DJ® cus-

tomer support for a R.A. number.

  Fusion Tri FX Bar  

 

                              Features

To optimize the performance of this product, please read these 

operating instructions carefully to familiarize yourself with the basic 

operations of this unit. These instructions contain important safety 

information regarding the use and maintenance of this unit. Please 

keep this manual with the unit, for future reference.

  Fusion Tri FX Bar  

 

           General Instructions

Summary of Contents for Fusion Tri FX Bar











Reviews: