4
Button
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
DMX input/output
For DMX512 link, use 3-pin XLR plug cable to link the unit together.
Remote control
By connect to the 1/4’’ microphone jack to control the unit for Stand by, Function and Mode
function.
Sensitivity
To adjust the sound receiving sensitivity
Power input/output
Connecting for mains power
3.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected,
press the
ENTER
button to setup or it will automatically return to the main functions without
any change after idling 8 seconds. To go back to the functions without any change press the
MENU
button. The main functions are showing below:
5
DMX 512 Address Setting
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address.
Once the address has been selected, press the
ENTER
button to store or it will
automatically return to the main functions without any change after idling 8 seconds. To go
back to the main functions without any change press the
MENU
button.
Master/Slave Mode
