2
1. Safety Instruction
WARNING
y
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
y
Unpack and check carefully there is no transportation damage before using the unit.
y
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
y
The unit is for indoor use only. Use only in a dry location.
y
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
y
Disconnect main power before replacement or servicing.
y
Make sure there is no flammable materials close to the unit while operating as it is fire
hazard.
y
Maximum ambient temperature is TA: 40
℃
. Don’t operate it where the temperature is
higher than this.
y
In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center. Always
use the same type spare parts.
y
Do not touch any wire during operation as high voltage might be causing electric shock.
Warning
y
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
y
The housing or the lenses must be replaced if they are visibly damaged.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact
your nearest dealer.
Please read carefully the instruction, which includes important information
about the installation, usage and maintenance.
3
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the
unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a 10 times
weight of the unit.
2. Technical Specification
y
Voltage
：
AC 100-240V~50/60Hz
y
Power Consuption:33W
y
Fuse: T 3.15A
y
Light
Source:
Total: 3W x 146pcs LED
R: 48pcs; G: 48pcs; B: 48pcs; W: 2pcs
y
Dimension: 542 x 143 x 194 mm
y
Weight: 3.7 kg
3. How To Set The Unit
3.1 Control Panel
Display
To show the various menus and the selected functions
LED
DMX
On
DMX input present
MASTER On
Master Mode
SLAVE
On
Slave Mode
SOUND
Flashing
Sound activation
