background image

User Instructions

  Flash Panel 16    

                                   Introduction

©

American DJ Supply

®

  -  www.americandj.com  - Flash Panel 16 Instruction Manual Page 2

  11/10

Unpacking: 

Thank you for purchasing the Flash Panel 16 by Ameri-

can  DJ

®

.  Every  Flash  Panel  16  has  been  thoroughly  tested  and  has 

been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the 
carton appears to be damaged, carefully inspect your fixture for any 
damage and be sure all accessories necessary to operate the unit has 
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Do not return this unit to your dealer without first contact-
ing customer support. 

Introduction: 

The Flash Panel 16 is part of American DJ’s continu-

ing pursuit for creating high quality affordable intelligent LED fixtures. 
The Flash Panel 16 is a DMX intelligent LED Panel. This LED panel can 
be controlled via DMX or via the optional CF card controller (Model: 
FP CFC). Dynamic effects can be played on it, which makes it a great 
system for DJ’s and night clubs. This unit can be used as a stand alone 
or linked together.  

 

Customer Support:

 American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 
4:30 p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact 
American DJ

®

.

PLEASE recycle the shipping carton when ever possible.

FLASH PANEL 16

Summary of Contents for FLASH PANEL 16









Reviews: