American DJ Fire Burst DMX, User Instruction

Page: 6 / 7

Dp9
-
Dp1
-
Dp2 Dp3 Dp4
Function Set
Dp5 Dp6 Dp8 Dp7 Dp10
0
DMX Mode
1= On
0= Off
- - - - - - -
Function
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
- - - -
- - -
-
-
-
- -
- -
- -
- - -
-
-
-
- -
- -
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
- -
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
0
0
1
1
0
0
1
1
1
0
1
0
1
0
0
1
0
1
1
0
0
1
1
0
1
1
0
0
0
1
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0 1 0 1
1 1 1 0
1 1 1 1
1 0 0 1
1
0
0
0
0
1
1
1
1
1
1
1
0
0
1
1
1 1
0 0
0 1
0 1
0 1
1 0
1 1
0 0
0
1
1
0
0 0
1 0
0
0
0
0
0 0 0 0 Dimmer 10%
Dimmer 16%
Dimmer 28%
Dimmer 22%
Dimmer 52%
Dimmer 40%
Dimmer 46%
Dimmer 34%
Dimmer 58%
Dimmer 64%
Dimmer 88%
Dimmer 94%
Dimmer 82%
Dimmer 76%
Dimmer 70%
Dimmer 100%
CW 1.0 RPM
CW 1.5 RPM
CW 2.0 RPM
CW 2.5 RPM
CW 3.5 RPM
CW 5.5 RPM
CW 12 RPM
CW 1.2 RPM
CCW 3.5 RPM
CCW 12 RPM
CCW 5.5 RPM
CCW 2.0 RPM
CCW 2.5 RPM
CCW 1.2 RPM
CCW 1.5 RPM
CCW 1.0 RPM
Fire Burst DMX™ Lamp Replacement
Fire Burst DMX™ Breaker Reset
Caution:
Always replace with the exact same type lamp, unless oth-
erwise specified by an authorized American DJ
®
technician. Replace
with anything other than the specified part can damage your unit and
will void your manufactures warranty.
Warning:
If after replacing the lamp you continue to blow lamps,
STOP using the unit. Contact customer support for further instruc-
tions, you may have to return the unit for servicing. Continuing to use
the unit may cause serious damage.
Lamp Replacement:
Caution! Never attempt to change the lamp
while the fixture is plugged in. Always disconnect the main power and
allow the unit ample time to cool before attempting to replace the lamp.
Lamp replacement has been made simple by incorporating the use of
a flip-up front cover that is retained by thumb screws.
1. Be sure to follow the proper handling procedures that deal with
halogen lamps.
2. Unscrew the two thumb screws located at the bottom rear of
the unit. Slide the bottom of the unit out.
4. Gently slide the socket assembly out and carefully remove the old
lamp and discard it in the trash.
5. Replace the lamp with an exact match and reassemble in reverse
order.
Fire Burst DMX™ Dipswitch Settings in Stand Alone Mode
American DJ Supply
®
- www.americandj.com - Fire Burst DMX™ Instruction Manual Page 13 American DJ Supply
®
- www.americandj.com - Fire Burst DMX™ Instruction Manual Page 11
Breaker Reset:
This unit is equipped with a built-in safety breaker.
This breaker is designed to close the power circuit in the event of an
internal short or power surge. This will reduce the risk of electrical
shock or fire and protect the circuitry. To reset the breaker, push the
breaker button in until you hear it “pop” back in to place. If the break-
er continues to pop, stop using the unit and contact our customer
support team, the unit may need to be returned for service.