Fire Burst DMX™
Operating Instructions
Fire Burst DMX™
Warranty Registration
The Fire Burst DMX™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Fire Burst DMX™
Features
• Includes Built-In Hanging Yoke
• Easy Access Lamp Replacement
• Simulates Fire
• Long Life ZB-EFR 15v/150w Lamp
• Changable Gobo (3 different gobos included)
Halogen Lamp Warning:
This fixture is fitted
with halogen lamps which are highly susceptible
to damage if improperly handled. Never touch the
lamps with your bare fingers as the oil from your
hands will shorten lamp life. Also, never move the
fixture until the lamps have had ample time to cool.
Remember, lamps are not covered under warranty
conditions.
Fire Burst DMX™
Halogen Lamp Precautions
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Fire Burst DMX™
General Instructions
American DJ Supply
®
- www.americandj.com - Fire Burst DMX™ Instruction Manual Page 3
American DJ Supply
®
- www.americandj.com - Fire Burst DMX™ Instruction Manual Page 4
Operation:
This fixture is designed to operate as a stand alone unit
or be contolled by a DMX controller. The Fire Burst DMX™ was creat-
ed to meet the demands of theatrical groups and production groups.
The desire was to create a low cost unit with an incredible effect,
without any strong flashing lights or special fog needs. This unit cre-
ates the effect of a blazing inferno. This fixture is ready to be plugged
in right out of the box. When the unit is plugged into a matching
power supply, the lamp will strike and the unit’s internal effect wheel
will immediately begin to turn.
Trouble Shooting:
Listed below are a few common problems that you
may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a wall outlet with a
matching power supply.
2. Be sure the external breaker has not blown. The breaker is located
on the rear panel.
3. Remove the lamp cover and be sure the lamp is seated in the
socket properly. Occasionally lamps become loose during ship-
ping, be sure the lamp is push in to the socket completely.
Fire Burst DMX™
Trouble Shooting
