©
American DJ Supply
®
- www.americandj.com - FAB 4™ Instruction Manual Page 11
Lamp Replacement:
Caution! Never open the unit when in use.
Always disconnect the main power and allow the unit ample time to
cool before attempting to replace the lamp. Remember always replace
with the same type lamp and fuse.
1. Be sure to follow the proper procedures when handling halogen
lamps.
2. Lamp replacement has been made simple by incorporating the
use of a removable lamp cover retained by two thumb screw.
3. Remove the thumb screws on the bottom of the unit that holds the
lamp cover in place.
4. Carefully remove the protective lamp cover.
5. Remove and replace the lamp.
6. Reassemble in reverse order.
©
American DJ Supply
®
- www.americandj.com - FAB 4™ Instruction Manual Page 12
FAB 4™
Lamp Replacement
Due to fog residue, smoke, and dust, cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
2. Use a brush to wipe down the cooling vents.
3. Clean the external portion of the optics with glass cleaner and a
soft cloth every 20 days. Situation may very. If used heavily in clubs
with lots of fog, cleaning may be required more often.
4. Clean the internal portion of the optics with glass cleaner and a
soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the
unit in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
FAB 4™
Cleaning
FAB 4™
Dual System Operation
This chart list the DMX dip switch setting for Master/Slave configura-
tion. Use this configuration when you will be using two systems in a
Master/Slave configuration. Head 1 (master) will control all functions
of the slave system.
Master - Head 1
Slave - Head 2
1
9
8
7
6
5
4
3
2
ON
1
9
8
7
6
5
4
3
2
ON
10
10
Retaining thumb screws
Lamp Shield
Lamp & Socket Assembly
FAB 4™
4-Unit Single System Operation
This chart list the DMX dip switch setting for single system operation.
When using this fixture as a stand alone unit or when using multiple
FAB 4™ systems as stand alone units, be sure all the fixtures match
the illustrated dip switch setting (9 and 10 to the on position - all
others off).
Sound Active
1
9
8
7
6
5
4
3
2
ON
10
