©
American DJ
®
- www.americandj.com - Emerald Beam™ Instruction Manual Page 4
©
American DJ
®
- www.americandj.com - Emerald Beam™ Instruction Manual Page 3
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Emerald Beam™
General Instructions
Emerald Beam™
Safety Precautions
Safety Issues:
This unit may blow a fuse if the maximum allotted load of 2
amps (1 amp 220v) is reached. If the fuse needs replacement, always replace the
fuse with same exact type that was remove, unless otherwise instructed by an
authorized American DJ® service technician. Use of a different type fuse from
that which is recommended may cause fire or electric shock and will void the
manufactures warranty.
• To reduce the risk of electrical shock or fire, do not expose this unit rain or
moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from the electrical
cord. This prong is used to reduce the risk of electrical shock and fire in case
of an internal short. Do not attempt to operate this unit if the power cord has
been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable
parts inside.
• Never plug this unit in to a dimmer pack.
• Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product outdoors voids all
warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power cords should be routed so they are not likely to be walked on, pinched
by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by the manu-
facturer. See page 8 for cleaning details.
• Heat -The appliance should be situated away from heat sources such as
r adiators, heat registers, stoves, or other appliances (including amplifiers)
that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a marked change
in performance.
• 4.9mW Green Laser Diode
• Built-In Hanging Yoke
•
Sound Active with
Internal Microphone
• Fan Cooled
• 16 Programs
• Music Sensitivity Knob
Emerald Beam™
Features
Emerald Beam™
Warranty Registration
The Emerald Beam™ carries a
90 day l
imited warranty. Please fill
out the enclosed warranty card to validate your purchase. All
returned
service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.)
number. If the unit is
under warranty you must provide a
copy of your proof of purchase
invoice. Please contact American
DJ
®
customer support for a R.A.
number.
DANGER
VISIBLE LASER RADIA
TION
-A
VOID DIRECT EYE EXPOSURE
LASER DIODE
WAVELENGTH : 532 nm
Max Output : <4.9mW
Class IIIa Laser Product
!
!
