![background image](http://html1.mh-extra.com/html/american-dj/eco-uv-bar/eco-uv-bar_user-instructions_2922998003.webp)
©American DJ® - www.americandj.com - Eco UV Bar™ User Manual Page 5
©
American DJ Supply
®
- www.americandj.com - Eco UV Bar™ User Manual Page 6
Eco UV Bar™
Operation
Introduction:
The American DJ
®
Eco UV Bar
™
is a UV LED wash.
This fixture is designed for mobile DJ’s, clubs, bands, roller rinks and
any arena that requires a compact, light weight, easy to use unit.
General Operation:
The American DJ
®
Eco UV Bar
™
contains an
electronic ballast, which will auto sense the voltage when it is plugged
into the power source. With the electronic ballast you do not need to
worry about wall voltage, this unit can be plugged in anywhere. This
fixture is designed to operate as a stand alone unit, there is no need
of a controller. It has been tested and there is no assembly necessary.
The Eco UV Bar™ is ready to be plugged in out of the box, just “flip”
the power switch. Plug the unit in to a matching power outlet or into a
power pack. Light output will be immediate when the unit is powered
on.
Eco UV Bar™
Cleaning
Eco UV Bar™
Trouble Shooting
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses should be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the
fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use
we recommend cleaning on a monthly basis. Periodic cleaning will
ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
4. Always be sure to dry all parts completely before plugging the unit
back in.
Trouble Shooting:
Listed below are a few common problems that you may encounter,
with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a matching wall power
outlet.
2. Be sure the fuse has not popped. The fuse is located on the rear
panel.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.