ADJ Products, LLC - www.adj.com - Dotz TPar System User Manual Page 15
ADJ Products, LLC - www.adj.com - Dotz TPar System User Manual Page 14
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
Dotz TPar System 3 Channel Mode
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 LIGHT 1 (Installed on top of the bar)
0 - 127 OFF
128 - 255 ON
5 LIGHT 2 (Installed on top of the bar)
0 - 127 OFF
128 - 255 ON
Dotz TPar System 5 Channel Mode
Dotz TPar System Dotz RF Remote
The Dotz
RF
remote
has many different functions and allows you to
control your Dotz TPar System from long distance. The remote can
control your system up to 25 meters. To use the remote you must first
activate the fixtures receiver, to activate the receiver please see the
instructions on page 11.
BLACKOUT
-
Pressing this button will blackout the fixture.
FADE -
This button will activate the color fade program.
COLOR -
This button will activate the static color mode. Use the “+”
and “-” buttons to scroll through the colors and find your desired
color.
PROGRAMS -
This button will activate the built-in programs mode.
Use the “+” and “-” buttons to scroll through programs 2-14 to find
your desired program.
LIGHT 1 ON -
This button will activate any light that is installed on the
top of the bar and connected to the first light connection (right side of
the bar).
LIGHT 1 OFF -
This button will deactivate any light that is installed
on the top of the bar and connected to the first light connection (right
side of the bar).
LIGHT 2 ON -
This button will activate any light that is installed on the
top of the bar and connected to the second light connection (left side
of the bar).
LIGHT 2 OFF -
This button will deactivate any light that is installed on
the top of the bar and connected to the second light connection (left
side of the bar).
SOUND ACTIVE -
This button activates sound active mode.
AUTO RUN
-
This button will run an automatic program. Use the “+”
and “-” buttons to adjust the speed of the auto run.
“+” and “-” -
Use these buttons to adjust the speed of the Auto Run,
scroll through the built-in programs, and scroll through the static col-
ors.
