ADJ Products, LLC - www.adj.com - Dotz Flood User Manual Page 15
ADJ Products, LLC - www.adj.com - Dotz Flood User Manual Page 14
Channel Value
Function
1
COLOR MACROS
0 OFF
1 - 7 BASTARD AMBER
8 - 15 MEDIUM AMBER
16 - 23 PALE AMBER GOLD
24 - 31 GALLO GOLD
32 - 39 GOLDEN AMBER
40 - 47 LIGHT RED
48 - 55 MEDIUM RED
56 - 63 MEDIUM PINK
64 - 71 BROADWAY PINK
72 - 79 FOLLIES PINK
80 - 87 LIGHT LAVENDER
88 - 95 SPECIAL LAVENDER
96 - 103 LAVENDER
104 - 111 INDIGO
112 - 119 HEMSLEY BLUE
120 - 127 TIPTON BLUE
128 - 135 LIGHT STEEL BLUE
136 - 143 LIGHT SKY BLUE
144 - 151 SKY BLUE
152 - 159 BRILLIANT BLUE
160 - 167 LIGHT GREEN BLUE
168 - 175 BRIGHT BLUE
176 - 183 PRIMARY BLUE
184 - 191 CONGO BLUE
192 - 199 PALE YELLOW GREEN
200 - 207 MOSS GREEN
208 - 215 PRIMARY GREEN
216 - 223 DOUBLE CTB
224 - 231 FULL RED
232 - 239 FULL GREEN
240 - 247 FULL BLUE
248 - 255 WHITE
Dotz Flood 1 Channel Mode
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller to control the chases, macros, dimmer and
strobe. A DMX controller allows you to create unique programs tai-
lored to your individual needs. The Dotz Flood has 6 DMX channel
modes; a 1 Channel Mode, 3 Channel Mode, 4 Channel Mode, 5
Channel Mode, & two different 9 Channel Modes: 9A Channel & 9B
Channel. To select your DMX channel mode see page 8.
1. To run your fixture in DMX mode, select your desired channel
mode and then set your desired DMX address following the
directions on page 8, and the set-up specifications that come
with your DMX controller.
2. Plug in the fixture via the XLR connections to any standard DMX
controller. See pages 15-20 for DMX modes, values, & traits.
3. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
Dotz Flood Universal DMX Control
Master-Slave Operation:
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit press the MENU button until “Slave Mode” is
displayed, and Press ENTER. Set the unit to the “Master” setting
and press ENTER. After you have set the unit to “Master” find
your desired operating mode.
3. On the slave units tap the MENU button until “SLND” is dis-
played, and Press ENTER. Choose either “SL 1” or “SL 2” and
press ENTER. See page 8 for more info.
4. The slave units will now follow the Master unit.
Dotz Flood Master-Slave Configuration
