ADJ Products, LLC - www.adj.com - Dotz Flood User Manual Page 20
ADJ Products, LLC - www.adj.com - Dotz Flood User Manual Page 21
Dotz Flood UC3 Control
Dotz Flood Power Cord Daisy Chaining
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 5 fixtures maximum. After 5 fixtures you will need to
use a new power outlet. They must be the same fixtures. DO NOT
mix fixtures.
Dotz Flood Installation
Dotz Flood Fuse Replacement
Dotz Flood Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact ADJ Products, LLC for service.
1-800-322-6337
Dotz Flood Troubleshooting
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder has a built-in socket for a spare fuse be sure not to confuse
the spare fuse with active fuse.
Dotz Flood DF FC Control
Blackout
Blackout the unit
Mode
Color
(Color Led On)
Chase
(Chase Led On)
Speed
(Speed Led On)
Down
Color Down
Chase Down
Speed Down
UP
Color Up
Chase Up
Speed Up
Full On
Full On
Blackout Blackout the unit
Function 1. Synchronous white strobe by auto
2. Synchronous white strobe by sound
3. Synchronous color strobe by sound
Select show 1-12 Select color 0-9
Mode
Sound 1
(LED OFF)
Show
(LED ON)
Color
(LED blinking)
The unit should be mounted using a mounting clamp (not provided),
affixing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is firmly fixed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit’s weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the fixture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
Channel Value
Function
9 DIMMER CURVES
0 - 40 DEFAULT TO UNIT CURVE SETTING
41 - 61 STANDARD
62 - 82 STAGE
83 - 103 TV
104 - 124 ARCHITECTURAL
125 - 145 THEATRE
146 - 255 NOTHING
Dotz Flood 4 Channel Mode
The DF FC is a wireless foot controller. Below are the controls
and functions. The DF FC is sold separately.
