PLAYBACK SCENES & CHASES
MANUAL RUN SCENES:
1. When power is first turned on, the unit is in manual scene mode.
2. Make sure
AUTO & MUSIC LED’S BUTTONS (FIGS. 8 AND 9)
are off .
3. Select
BANK (FIG.4),
using the
UP
and
DOWN BANK BUTTONS
(FIG.4)
, that store the scenes you wish to run.
4. Press the
SCENE BUTTONS (FIG.2)
to run the scene you selected.
MANUAL RUN CHASES:
This function will allow you to manually step through all scenes in
any Chase.
1. Press the
PROGRAM BUTTON (FIG. 6)
for three (3) seconds to
activate program mode. The
LCD DISPLAY (FIG.3)
will indicate
program mode by displaying a continuous fast blinking dot next
to
‘PROG.’
2. Execute a chase by selecting one of the eight
CHASE BUTTONS
(FIG.5).
5. Press the
TAP/SYNC BUTTON (FIG.11)
.
6. Use the
BANK BUTTONS (FIG.4)
to scroll through the chase.
Note:Display will show the number of the step in the Chase not
the Scene bank or number
AUTO RUN SCENES:
This function will run a bank of programmed scenes in a sequential
loop.
1. Press the
AUTO/DEL (FIG.8)
to activate Auto Mode.
A flashing
light in the
LCD DISPLAY (FIG.3)
will indicate auto mode.
2. Use the
UP
and
DOWN BANK BUTTONS (FIG.4)
, to select a bank of
scenes to run.
3. After selecting the bank of scenes you want run, you can use the
SPEED (FIG.13)
and
FADE (FIG.12)
sliders to adjust the scene chase
Note: you can change banks, to run different scene sequences,
at any time by pressing the
UP
and
DOWN BANK BUTTONS (FIG.4)
.
Note: when Adjusting fade time never make it slower than the
Speed setting or your scene will not be completed before a new step
is sent.
American DJ Los Angeles, CA 90058 -
DMX OPERATOR
User Manual
