PROGRAMMING CHASES:
N
OTE
: Y
OU MUST PROGRAM SCENES BEFORE YOU CAN PROGRAM CHASES
.
1. Press the
PROGRAM BUTTON (FIG. 6)
for three (3) seconds to
activate program mode. The
LCD DISPLAY (FIG.3)
will indicate
program mode by displaying a continuous fast blinking dot next
to
‘PROG.’
2. Select any
CHASE 1 TO 6 (FIG 5)
to program.
3. Select a desired
SCENE (FIG2)
from any bank that has been
previously recorded.
4. Press the
MIDI/REC BUTTON (FIG.7). All LED’s blink 3 times
5. Repeat steps 3 & 4 as many times as you want.
You may store up to 240 steps into one chase.
6. To exit programming press the
PROGRAM BUTTON (FIG. 6)
for
three (3) seconds to de-activate program mode. The
LCD
DISPLAY (FIG.3)
will indicate blackout mode by displaying a
continuous fast blinking dot next to
‘Blackout.’
You May now playback the Chase Recorded Pg. 14
EDITING CHASES
INSERT A STEP:
1. Press the
PROGRAM BUTTON (FIG. 6)
for three (3) seconds to
activate program mode. The
LCD DISPLAY (FIG.3)
will indicate
program mode by displaying a continuous flashing light next to
‘PROG.’
2. Select the
CHASE 1 TO 6 (FIG 5)
you wish to add a step to.
3. Press and release the
TAP SYNC/DISPLAY BUTTON (FIG.11).
The Display will now change to the step you are now in.
4. After selecting the
TAP SYNC/DISPLAY (FIG.11)
use the
UP
and
DOWN BUTTONS,
to manually scroll to the STEP you wish to insert a
step after.
5. Press
MIDI/REC (FIG.7)
the LCD will read one step number higher
6. Press the Scene Button you want to insert
6. Press
MIDI/REC (FIG.7)
again to insert new step.
7. Press and release the
TAP SYNC/DISPLAY (FIG.11)
to return the dis
play to normal operation.
American DJ Los Angeles, CA 90058 -
DMX OPERATOR
User Manual