![background image](http://html1.mh-extra.com/html/american-dj/color-burst-led/color-burst-led_user-instructions_2922667003.webp)
©American DJ® - www.americandj.com - Color Burst LED Instruction Manual Page 5
©
American DJ Supply
®
- www.americandj.com - Color Burst LED Instruction Manual Page 6
Operating Modes:
There are 2 modes to choose from:
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
• Chase Mode - Choose one of 17 built-in chases.
Sound Active Mode:
In this mode the Color Burst LED will react to sound, and chase
through the different colors.
1. Plug the fixture in and turn the Chase knob to the sound active
setting, which is turning the knob all the way clockwise.
2. Adjust the sound sensitivity knob.
3. The fixture will now change color via sound.
Chase Mode:
Choose one of 17 built-in chases, and adjust the speed of the chase.
1. Plug the fixture in and turn the Chase knob to find your desired
chase
.
2. Adjust the chase speed knob to your desired chase speed.
Chases 1-16 are preset chases and chase 17 is random chase.
3. The fixture will now run your selected chase.
Mel
Color Burst LED Operating Instructions
Color Burst LED Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
The unit does not work
1. Check the power connection and the fuse.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Check the microphone by tapping on the unit.
3. Check the sound sensitivity knob. If it is turned all the way counter
clockwise the sensitvity is at lowest level.
If problems are not resolved;
Contact American DJ® for service.
1-800-322-6337
Color Burst LED Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter
-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).