6
TEST:
Before permanently installing the machine, do a functional test to verify that there is no shipping
damage to your new changer. Install and connect the battery as shown in the below picture.
The
machine is preset to accept $1 and $5 U.S. dollar bills and pay out 4 coins per dollar (unless otherwise
specified at the time of purchase).
Install the battery as shown in Figure 1 and connect the power harness. Fill the hoppers with a minimum
of 100 coins. On the Main Logic Board, turn the switch on the bottom right corner “ON.”
The rocker
switch has an “I” and “O” printed on it. When the “I” is pressed down, the changer is “ON.”
If the
machine does not function properly please contact American Changer’s Technical Support Department
at
or 1-888-741-9840.
2.2 – Mounting Instructions
This machine must be installed in accordance with local codes. If you are unsure in any way what your
local codes are or unsure of anything in the following steps, please hire a licensed professional to
mount your machine.
1.
Disconnect the battery and remove it from the cabinet.
2.
Remove the hoppers from the cabinet.
3.
Locate the 4 punch-outs on the back or side wall of the changer. Using a screwdriver and hammer,
remove the punch-outs by striking them from the inside of the machine.
4.
Find an appropriate stable structure which to secure the machine to.
Battery
Power
Harness
Figure 1
Summary of Contents for AC401-2
Page 2: ...2...
