19
Description
LED Status
Troubleshooting
Outside antenna and Inside
antenna are not isolated enough
from each other.
So the Signal Booster is shutdown
at this frequency.
Change the position of Outside
and Inside antennas. Make sure the
Outside antenna is not facing towards
your own roof or at the inside antenna
as this will cause isolation issue and
the signal booster will stop amplifying
signals at this frequency.
Uplink Signal coming from the outside
antenna to Base Station is too strong
and may cause troubles to carriers
network, so the Signal Booster stops
service at this frequency.
Change the position of Outside
and Inside antennas. Make sure the
Outside antenna is not facing towards
your own roof or at the inside antenna
as this will cause isolation issue and
the signal booster will stop amplifying
signals at this frequency.
Signal from BTS station is too weak.
Change the position of Outside
antenna to receive stronger signal
from Base Station.
Outside antenna and Inside antenna
is not isolated enough from
each other.
Change the position of Outside and
Inside antennas. Make sure the
Outside antenna is not facing towards
your own roof or at the inside
antenna as this will cause isolation
issue and the signal booster will not
be able to amplify signals at
maximum power.
Status LED is red.
Output bars are flashing green.
The Signal Booster works properly.
Flashing Red during 30 mins,
then Solid Red.
B-25K User Guide
Summary of Contents for B-25K
