www.americanbeautytools.com
9
1.
When installing a soldering tip into your iron please ensure
the tip is fully seated in the iron.
This will help prevent
premature burnout of the heating element.
2.
Plug the station into an approved 3-wire (grounded) outlet
while iron is resting in iron stand. Turn the dial clockwise to
turn the unit ‘ON’. The LED indicator light will be lit at this
time.
SE
T-
U
P & O
PE
RA
TI
O
N
Proper Use of Soldering Station
3.
The soldering station will have output ratings ranging from
30% to 100% surrounding the dial. Turn the dial to the
desired setting at this time. These ratings are there to help
identify, note, and repeat the proper setting for your
application.
4.
The proper setting will be application dependent and
determined through trial and error or by measuring tip
temperature using an external device.
5.
Place the tip of your soldering iron on the base metals to
be soldered to bring them to temperature.
Note:
The base
metals to be soldered should be clean and free of coatings,
oils, or contaminants.
6.
Once the base metals have been heated to temperature,
begin applying the appropriate solder for the application.
