www.americanbeautytools.com
7
SE
T-
U
P & O
PE
RA
TI
O
N
Selecting a Location
Choosing a good location to station your Industrial Grade Soldering
Station is the first step to operating your soldering station safely
and efficiently. To assist with this, we have created a checklist of
considerations to guide you in selecting a location for your soldering
station.
• Area is well ventilated
• Surface is both flat and level
• Surface is both chemically and thermally resistant
• Area is away from high volume foot traffic zones
• Area is free from excess clutter
• Workspace is not in the direct path of airflow from AC or furnace
vent
• Workspace is preferably on an inside wall, or at-least away from
windows
• Workspace has access to a properly grounded outlet whose
output voltage matches that of your tool. (110-120VAC or 220-
240VAC)
• Workspace has adequate space that allows the power cord to
hang freely
Following these basic steps should ensure a suitably safe and efficient
location for the operation of your soldering station.
Assembly of Soldering Station
The V36G-series requires some minor assembly of the soldering
iron stand and attaching the stand to the unit. All of this can be
accomplished with a standard phillips screwdriver. See next page.
