background image

©

American Audio

®

 - www.AmericanAudio.com - Q-2422 PRO   User Instructions page 6

Introductions: 

Congratulations  and  thank  you  for  purchasing  the  American  Audio

®

  Q-2422  PRO  

mixer. This mixer is a representation of American Audio’s continuing commitment to produce the best 
and highest quality audio products possible at an affordable price. Please read and understand this 
manual completely before attempting to operate your new mixer. Please carefully read and understand 
the instructions in this manual thoroughly before attempting to operate this unit. These instructions 
contain important safety information regarding the use and maintenance of this unit. Take special care 
to follow all warning symbols and labels both on the unit and printed in this manual. Also, Please keep 
this manual with the unit, for future reference.
Customer Support: 
American Audio

®

 provides a toll free customer support line, to provide set up help and answer any 

question should you encounter problems during your initial set up or operation. You may also visit us 
on the web at www.americanaudio.us for any comments or suggestions. Service Hours are Monday 
through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time.
 

Voice:  

(800) 322-6337

 

Fax:    

(323) 582-2610

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com
Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself, 
without being instructed to do so by an authorized American Audio service technician. Doing so will 
void your manufactures warranty. In the unlikely event your mixer may require service, please contact 
American Audio

®

 customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

 Q-2422 PRO    

 

  

  

 

 

                   INTRODUCTION

 Q-2422 PRO    

 

  

  

 

                SET-UP PRECAUTIONS

Please be sure to make any connections before plugging the mixer in to an electrical outlet. All fader 
and volume controls should be set to zero or minimum position, before the mixer is switched on. If the 
mixer has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on 
the mixer immediately. The arising condensation of water might damage your device. Leave the device 
switched off until it has reached room temperature.
Operating Determinations:
•  When installing this mixer, please make sure that the device is not exposed or will not be 
  exposed to extreme heat, moisture or dust!
•  Do not operate the mixer in extremely hot (more than 30°/100°F) or extremely cold (less than 
  5°C/40°F) surroundings. 
•  Keep the unit out of direct sunlight and away from heaters.
•  Operate the mixer only after becoming familiar with its functions. Do not permit operation by 
  persons not qualified for operating the mixer. Most damages are the result of unprofessional 
  operation!
•  Do not attempt to operate this mixer if the power cord has been frayed or damaged. 
•  Disconnect from main power before making any type of connection.
•  Do not attempt to operate this mixer, if it becomes damaged in any way.
•  Never operate this mixer when it’s covers are removed.
•  To reduce the risk of electrical shock or fire, do not expose this mixer to rain or moisture.
•  This mixer is intended for indoor use only, use of this product outdoors voids all warranties.
•  During long periods of non-use, disconnect the mixer’s main power.

Summary of Contents for Q-2422 MKII Limited























Reviews: