©
American Audio
®
- www.AmericanAudio.com - Q-2422 PRO User Instructions page 8
Q-2422 PRO
FRONT PANEL - CONTROLS AND FUNCTIONS
1
.
MICROPHONE EQ SECTION -
MICROPHONE BASS CONTROL -
This knob is used to adjust the low frequency levels of the
microphone with a maximum signal gain of +12dB or maximum signal decrease of -30dB. Turning the
knob in a counter-clockwise direction will decrease the amount of bass applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of bass applied to micro-
phone signal.
MICROPHONE MIDRANGE CONTROL -
This knob is used to adjust the midrange levels of the
microphone with a maximum signal gain of +12dB or maximum signal decrease of -30dB. Turning
the knob in a counter-clockwise direction will decrease the amount of midrange applied to the micro-
phone signal, turning the knob in a clockwise direction will increase the amount of midrange applied
to microphone signal.
MICROPHONE TREBLE CONTROL -
This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of +12dB or maximum signal decrease of -30dB. Turning the
knob in a counter-clockwise direction will decrease the amount of treble applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of treble applied to micro-
phone signal.
2. MICROPHONE 1 -
This combo jack will accept a standard 1/4 plug or XLR 3-pin balanced male
plug. The volume output level for this microphone will be controlled by its own respective
VOLUME
KNOB (25).
Note: We recommend that you use a 500-600ohm microphone for the best sound
quality.
3. SOURCE SELECTOR SWITCH -
These switches are used to select the input source assigned to
1
11
10
9
8
7
6
5
4
3
2
26 25
24 23
22
14
15
16
17
18
19
20
21
13
12
