background image

©

American Audio

®

   -   www.americanaudio.us   -   Q-2411™ Instruction Manual Page 5

1.  For adult use only - Keep out of the reach 
of   children.
2.  Water and Moisture - The player should not 
be used near water - for example, near a bath 
tub,  kitchen  sink,  laundry  tub,  in  a  wet  base-
ment  or  near  a  swimming  pool,  etc.  Do  not 
spill  water  or  other  liquids  in  to  or  on  to  your 
mixer.
3.  Ventilation  -  The  Mixer  should  be  situated 
so that its location or position does not inter-
fere  with  its  proper  ventilation.  For  example, 
the  Mixer  should  not  be  situated  on  a  bed, 
sofa, rug, or similar surface that may block the 
ventilation  openings;  or,  placed  in  a  built-in 
installation, such as a bookcase or cabinet that 
may impede the flow of air through the ventila-
tion openings.

 
4.  Heat  -  The  Mixer  should  be  situated  away 
from heat sources such as radiators, heat reg-
isters,  stoves,  or  other  appliances  (including 
amplifiers) that produce heat.
5.  Power Sources - The Mixer should be con-
nected to a power supply (wall outlet) only of 
the type described in the operating instructions 
or as marked on the Mixer.
6.  Servicing  -The  user  should  not  attempt  to 
service the Mixer beyond that described in the 
operating  instructions.  There  are  no  user  ser-
viceable parts inside. All other servicing should 
be referred to qualified service personnel. The 
Player should be serviced by qualified service 
personnel when:
    A.   The power-supply cord or the plug has  
   

been damaged.

    B.  Objects have fallen, or liquid has been   
   

spilled into the Mixer.

     C.  The Mixer has been exposed to rain  
   

or water.

     D.  The Mixer does not appear to operate  
   

normally or exhibits a marked change  

   

in performance.

7.  Never  disassemble  or  modify  your  unit  in 
any way, doing so will void your manufactures 
warranty.

 

 Q-2411™ 

 

 

 

 

 

                  

SAFETY PRECAUTIONS

8.  Never plug this mixer in to a dimmer pack.
9.  Do not let insecticides, benzene, or thinner 
come in contact with the surface of the  
unit.
10. This unit is intended for indoor use only, use 
of this product outdoors voids all warranties.
11. Always  mount  this  unit  in  safe  and  stable 
matter.
12. Disconnect from main power before making 
any type of connection.
13. Cleaning  -  The  mixer  should  be  cleaned 
only  as  recommended  by  the  manufacturer. 
Use a soft cloth to wipe down the outside of the 
unit.  For  stubborn  stains  moisten  a  soft  cloth 
with  glass  cleaner  or  other  mild  detergent  to 
wipe away any stains. Use a soft cloth to wipe 
any  residual  cleaner.  Never  use  volatile  clean-
ers  such as benzene, solvent, or thinner to clean 
your unit, these cleaners will damage the units 
surface. 

14. Handle the power supply cord carefully. Do 
not  damage  or  deform;  it  may  cause  electric 
shock  or  malfunction  when  used.  Hold  plug 
attachment  when  removing  from  wall  outlet. 
Do not pull on the cord.
15. To  avoid  electric  shock,  do  not  open  the 
top cover when the unit is plugged in. If prob-
lems occur with the unit, call American Audio

®

 

customer support.
16. Do not place metal objects or spill any liq-
uids  inside or on the mixer. Electric shock or 
malfunction may occur.
17. Power  Cord  Protection  -  Power  supply 
cords  should  be  routed  so  that  they  are  not 
likely  to  be  walked  on  or  pinched  by  items 
placed upon or against them, paying particular 
attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the 
mixer. Route your power cord out of the way of 
foot traffic.
18. Always  have  the  front  gain  controls  set  to 
their lowest level during initial power-up to pre-
vent speaker damage.

Summary of Contents for Q-2411





















Reviews: