Model: Q-2411 4 Channel Mixer
POWER SUPPLY:
AC 115v~60Hz/230v50Hz, User Selectable
DIMENSIONS:
482.6mm (W) x 177mm (D) x 97mm (H)
WEIGHT:
6.6 Lbs. / 3.0Kgs.
CROSSFADER:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION:
12W typical, 20W w/ full headphone output
HEADPHONE IMPEDANCE:
16 Ohms
OPERATING TEMPERATURE:
5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
Input Sensitivity (Level/Impedence):
Note: 0dBV output, load = 47K OHM
LINE, AUX:
10K OHM / -14dBV (200mV) +/-2dB
PHONO:
47K OHM / -54dBV (2mV) +/-2dB
MICROPHONE 1:
2.2K OHM / -54dBV (2mV) +/-2dB
MICROPHONE 2:
2.2K OHM / -60dBV (1mV) +/-2dB
Output Sensitivity (Level/Impedence):
Note: 0dBV=1Vrms
MASTER:
300 OHM
MASTER OUT (XLR):
600 OHM / 2.21dBm (1V) +/-2dB
REC OUT (RCA):
2.2K OHM / -10dBV (316mV) +/-2dB
PHONES:
(LOAD=32 OHMS)
33 OHM, CUE IN / 0dBV (1V) +/-2dB
Maximum Output:
(LOAD = 47K, THD = 1%)
MASTER/ZONE:
MORE THAN 18 dBV (8.0V)
PHONES:
(LOAD=32 ohms)
MORE THAN 4.6dBV (1.6V)
CHANNEL BALANCE:
WITHIN 3dB
Frequency Response:
LINE/AUX:
20 - 20KHz +1 /-2dB
PHONO:
20 - 20KHz +2 /-3dB (RIAA)
MICROPHONE:
20 - 20KHz +2 /-3dB
Noise:
(maximum output) IEC-A weighted
LINE/AUX:
LESS THAN -90dBV
PHONO:
LESS THAN -66dBV
MIC 1:
LESS THAN -66dBV
MIC 2:
LESS THAN -60dBV
THD - Total Harmonic Distortion:
(MASTER = 0dBV OUTPUT, w/ 20KHz LPF, EQ Flat):
LINE:
LESS THAN 0.02% 20 - 20KHz
CROSS TALK:
(MASTER = 0dBV OUTPUT)
LINE:
-65dB OR LESS AT 1KHz BETWEEN L AND R
-70dB OR LESS AT 1KHz BETWEEN CHANNELS
EQ:
MASTER:
+10 +/-2dB AT 60, 250, 1K, 4K. and 16KHz
-10 +/-2dB AT 60, 250, 1K, 4K, and 16KHz
Q-2411™
SPECIFICATIONS
©
American Audio
®
- www.americanaudio.us - Q-2411™ Instruction Manual Page 19
