GENERAL FUNCTIONS AND CONTROLS
©
American Audio
®
- www.americandj.com - Pro-DJ™ Instruction Manual Page 8
1. BANK BUTTONS -
These buttons are used to store cue points or seamless loops. They are also
provide direct track access. eg. Button 5 will start track number 5.
2. MEMORY BUTTON -
This button allows you to store a cue point or seamless loop in any of the
BANK BUTTONS (1)
.
3. RECALL BUTTON -
This button allows you to access any cue points or seamless loops stored in
any of the
BANK BUTTONS (1).
4. OPEN/CLOSE
(Disc Tray Open/Close)
-
This button is used to open and close the disc transport
tray door.
NOTE:
When a disc is loaded, the tray will not open unless the unit is in pause or cue
mode.
5. LIQUID CRYSTAL DISPLAY (LCD)
- This high quality LCD Indicates all the functions (play, pause,
cue, etc...,), as they occur. This display is viewable at several comfortable angles as described on
page 11. The LCD icons will be described in the next section.
6. JOG WHEEL -
(INNER WHEEL) This jog wheel serves two functions depending on the current
operating mode:
A.
The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allow-
ing you to set a specific cue point or find a particular starting point.
B.
The inner wheel also works as a momentary pitch bend during playback. Turning the wheel clock-
wise will increase the pitch percentage up to 12%, and turning the wheel in the counterclockwise
direction will decrease the pitch percentage up to -12%. The pitch bend will be determined on how
fast you turn the wheel.
SHUTTLE WHEEL -
(OUTER RING) This wheel has two forward and two reverse speed positions
for speed searching through tracks. The more you turn the wheel in either direction, the faster you
Figure 5
Figure 4
Figure 3
26
25
24
23
22
28
27
29
11
10
9
8
7
5
4
3
2
1
21
20
19
18
17
16
15
14
13
12
6
