background image

6. Counterweight (27):

Locate and remove the tonearm Counterweight (27) from the packaging. Slide Counterweight (27) onto 
the rear of the Tonearm (21). Turn it lightly and it will screw onto the rear shaft of the tonearm.

Turntable Connections:

1. Connect the unit's stereo output leads to a receiver or mixer. The red phono terminal represents the 
 

right output channel and the white terminal represents the left output channel. 

2.  The thin black wire with a spade connector is the ground lead. The ground lead must be connect to 
 

the mixer (receiver) to avoid pops and clicks associated with magnetic pick-up system such as  

 

turntables.

 

 

 

Output Leads

 

 

 

    

Mixer (Receiver)

 

 

 

L (White)   

----------------------------->    L Channel

 

 

 

R (Red) -----------------------------> 

Channel

 

 

 

GND (Spade)-----------------------------> Ground

3.  Connect the power core to matching outlet for your area. Only connect the power cord after the all 
 

other connections have been made.

NOTE: Be sure to connect the ground terminals firmly to the Mixer or receiver.

   SET-UP

A

MERICAN 

A

UDIO

®

A

MERICAN 

A

UDIO

®

Phono ground lead

Stereo phono lead

Stereo phono lead

Phono ground lead

©

American Audio

®

   -   www.americandj.com   -   Power Drive 2.2™ Instruction Manual Page 11

Summary of Contents for POWER DRIVE 2.2





















Reviews: