CONTROLS AND FUNCTIONS
19. Stylus Headshell -
The included headshell is used to connect your stylus
with the tone arm.
20. Headshell Locking Nut -
After attaching the headshell to the tonearm, this
locking nut will securely hold the headshell to the
tonearm.
21. S-Shaped Tone Arm -
The tonearm is the mechanism that holds the head-
shell and stylus allowing it to glide across a record.
22. Tonearm Lift Adjust Screw -
This screw is used to adjust the clearance between
the stylus and a record. The stylus clearance is set
at the factory to be between 8~13mm. Adjustments to
the tonearm clearance should only be made if
necessary.
23. Tonearm Assembly Height Control -
This adjustment is used to control the overall height
of the tonearm assembly. The tonearm should always
be perfectly parallel to the platter.
24. Tonearm Clamp and Rest -
Use this rest to safely hold the tonearm in position
during non use and transportation.
25. Tonearm Lever -
This lever is used to safely elevates the tone arm
above a record surface without endangering a
records surface.
26. Anti-Skate Control -
The anti-skate applies inward force to the tonearm to
prevent outward skipping across the record due to the
centrifugal force cause by platter rotation. The anti-
skate value should be equally to that of the stylus
counterweight pressure (see counterweight 27).
27. Counterweight -
The counterweight adjustment applies the proper
downward pressure on the stylus.
19
21
22
23 24 25 26
27
20
©
American Audio
®
- www.americandj.com - Power Drive 2.2™ Instruction Manual Page 16