19
Engineering Data - HRV
Model HRV120SRD
FRESH AIR
FROM
OUTSIDE
STALE
AIR TO
OUTSIDE
STALE AIR
FROM BUILDING
FRESH AIR
TO BUILDING
BOTTOM VIEW FOR HORIZONTAL MOUNT
SERVICE CLEARANCE FROM BOTTOM
OF UNIT IS MINIMUM 3’0”
SIDE VIEW FOR HORIZONTAL MOUNT
ALL DUCT COLLARS
ARE 5” DIAMETER
Connect drain hose to spout located in door.
9-1/8”
(232
mm)
25 1/8”
(637 mm)
22”
(559
mm)
HANGING STRAPS
STALE AIR
TO OUTSIDE
FRESH AIR
FROM OUTSIDE
ACCESS DOOR
STALE AIR
FROM BUILDING
FRESH AIR
TO BUILDING
Option 1 - Horizontal Duct Configuration Dimensions
inches
FRESH AIR
FROM
OUTSIDE
STALE
AIR TO
OUTSIDE
STALE AIR
FROM BUILDING
FRESH AIR
TO BUILDING
SIDE VIEW FOR VERTICAL MOUNT
SERVICE CLEARANCE FROM BOTTOM
OF UNIT IS MINIMUM 3’0”
TOP VIEW FOR VERTICAL MOUNT
Connect drain hose to the two field installed
spouts located on the bottom of the unit.
9-1/8”
(232
mm)
25 1/8”
(637 mm)
22”
(559
mm)
HANGING STRAPS
STALE AIR
TO OUTSIDE
FRESH AIR
FROM OUTSIDE
ACCESS DOOR
STALE AIR
FROM BUILDING
FRESH AIR
TO BUILDING
“L” BRACKETS
(not included)
May be installed if
wall mounting is
desired for the
vertical installation.
ALL DUCT COLLARS ARE
5” (127 mm) DIAMETER
Option 2 - Vertical Duct Configuration Dimensions
inches
The HRV can be installed horizontally or vertically as
illustrated on the following pages. The unit should be
suspended using the provided hanging straps. The unit must
be level for proper condensate drainage.
Sufficient clearance below the access door is required for
servicing the air filters and core. A minimum of 25"
(635mm) clearance is recommended so the door can be
removed. Four PVC reinforced polyester hanging straps are
provided for hanging the HRV.
Summary of Contents for Heat Recovery Ventilator HRV 120SRD
Page 35: ......
