20
2.9
Connecting to a charting program via USB
Your transponder can be used as a source of AIS for electronic charting and navigation
program (PC/Mac) such as NaviPro, TimeZero, Coastal Explorer or OpenCPN etc. Follow
the steps below to connect the transponder to the software:
Connect the transponder to your PC or Mac using the USB cable that comes with
the package. In most cases, the USB driver will be installed automatically. When
it’s not the case, you can find the driver on the attached CD and install it
manually.
Make sure the baud rate is set at 115200. The data port can be confirmed by
running the Device Manager on your computer or be detected automatically
depending on the software.
