8
(5) Attach the dome cover to the dome base with rope.
(6) Set the dome address, system baud rate and protocol by configuring DIP switches SW1 and
SW3 located on the side of dome body. The Plug-in on the dome body must be seated rightly
with the socket on the dome base.
(7) To lock the dome body to the dome base, line up the A and B tabs on the dome body with the A
and B label on the dome base. Push in on the tabs. Insert one side and then the other side.
Continue pushing one the ends of the tabs until both sides click into place. Make sure the
plug-in on the dome body is fully locked by the socket on the dome base. Then press the
dome body lightly and check if the dome body is fully locked to avoid shedding and abrasion
Summary of Contents for SD-436R
Page 1: ...SD 436R USER S MANUAL VER 1 0 2012...
Page 7: ...6 4 2 Structure 4 3 Installation Size...
Page 15: ...14...