3
z
If light sources such as spot light cause burn-in on the display screen, part of
image may discolor due to deterioration of color filter in CCD when
changing aim of the camera etc.
5 Do not install this camera upside down.
z
This camera is designed for mounting on the ceiling or wall. Using this
camera installed upside down, for example, mounted on the floor, may cause
malfunction.
6 Do not operate the camera beyond the specified temperature, humidity or
power source ratings.
z
Do not use the camera in an extreme environment where high temperature or
high humidity exists. Do not place near heat sources such as radiators, stoves
or other units that produce heat.
z
Use the camera under conditions where temperature is between -30°C -
+50°C, and humidity is below 90 %. The input power source is DC12V/3A.
7 Do not install the camera near the air out-let of an air conditioner.
The lens may become cloudy due to condensation if the camera is used under the
following conditions.
z
Rapid temperature fluctuations by switching the air conditioner on and off.
z
Rapid temperature fluctuations due to frequent door opening and closing.
z
Use in an environment where eyeglasses become foggy.
z
Use in a room filled with cigarette smoke or dust.
8 Consumables
z
Parts having contacts such as the lens-drive motors, cooling fan motor and
slip rings built inside the camera are subject to wear with time. About
replacement and maintenance of such parts, please ask the local dealer.
