OPERATION
The speed dome camera can be controlled remotely horizontal and vertical
movement. It is used with a system controller, separately. It is controlled remotely
from the controller through a serial connection to the RS-485 connector using a
twisted-pair cable.
Preset Memory
The preset memory function will memories camera positions and zoom, focus, etc.
Setting up to 128 preset camera positions can be memorized. Later, you can easily
recall any of the preset camera positions by entering its corresponding number, and
the camera will move the memorized position with all the preset settings.
z
To set a preset position
N + PRESET , the LCD will display N: Preset number
N: The number of preset position: 1~128.
z
To call a preset position
When camera positions have been preset, you can enter a memorized camera
position number.
N + CALL , the LCD will display N: Call Preset number
N: The number of preset position: 1~128.
Pan / Tilt Function
The pan function will move the camera on all horizontal planes, to surveillance
position. The tilt function will move the camera on a vertical plane, to surveillance
position. The speed is variable according to the angle of joystick.
10
